EWM-SP-DAD - Card for axis control (stroke and pressure) with Profibus communication interface


This card has been developed for positioning control with integrated closed loop pressure where an high accuracy is needed, using a digital sensor for positioning, and analogue sensors for pressure sensing.

The card is an axis controller with two positioning control mode, SDD and NC. It communicates with the PLC via the integrated Profibus interface.

An integrated control for pressure limitation for one or two sensors (differential pressure), completes the card.

The output value, voltage or current type, has to be configured via software.

Card setup is via software only, through an USB-B port. Defined parameters can be configured via the Profibus interface.

CLICK HERE to download the start-up manual.


NOTE: to download the PDF catalogue of the old series click here